GenFrontier homeScope a project
Menu
Filed under
Deliver toShipping leads and fulfillment teams choosing cartons and checking parcel bills

Dimensional weight calculator for UPS and FedEx

Calculate parcel dimensional and billable weight with current UPS and FedEx rules. Round each inch up, divide by 139 or 166, then bill the greater weight.

Plan a fulfillment project
resources / dimensional-weight-calculator
A kitchen scale tipping down under an enormous, light cardboard box with a feather poking out of one corner, the scale needle printed red

Calculator

Example values are filled in. Replace them with your own; results update as you type. Nothing you enter leaves your browser.

139 is the US divisor UPS publishes for daily rates and FedEx for list rates (UPS retail rates use 166). Contracts can differ.

Results

Dimensions used (each rounded up to the next whole inch)
24 × 18 × 14 in
Cubic size
6,048 cubic in
Dimensional weight
44 lb
Actual weight, rounded up
22 lb
Billable weight
44 lb (dimensional)

Carriers publish their own rounding rules and divisors, and contracts can change them. Check the current service guide before quoting a customer.

Parcel carriers bill large, light packages by size as well as weight. The billable weight is the greater of the actual weight and the dimensional weight, which is the package’s volume divided by a divisor. This calculator applies the rules UPS and FedEx publish for US shipments, including the round-up of every fraction of an inch and every fraction of a pound.

How to use the calculator

  1. Measure the package as it will ship, at its longest, widest and tallest points, including any bulge.
  2. Enter length, width and height in inches. The calculator rounds each one up to the next whole inch.
  3. Enter the actual weight in pounds.
  4. Set the divisor. UPS publishes 139 for Daily Rates and 166 for Retail Rates. FedEx divides by 139. Your carrier agreement may set a different number.

The rules and the formula

  1. Round each dimension up to the next whole inch. UPS: “1.01 to 1.99 will be rounded up to 2.” FedEx: “Any fraction of an inch is rounded up to the next-higher inch.”
  2. Cubic size = L × W × H
  3. Dimensional weight = cubic size ÷ divisor, with any fraction rounded up to the next whole pound
  4. Billable weight = the greater of dimensional weight and actual weight, with actual weight also rounded up to the next pound

FedEx calls the result chargeable weight: “the greater of the actual weight or the dimensional weight.”

Divisor Where it applies
139 UPS Daily Rates; FedEx (Service Guide, list rates effective January 5, 2026)
166 UPS Retail Rates
Other As set in your own carrier agreement

Example (fictional). A carton for item EX-20118 measures 24 × 18 × 14 inches and weighs 22 pounds. It ships at a 139 divisor.

  • Dimensions used: 24 × 18 × 14 inches (already whole inches)
  • Cubic size: 24 × 18 × 14 = 6,048 cubic inches
  • Dimensional weight: 6,048 ÷ 139 = 43.5, rounded up to 44 lb
  • Actual weight: 22 lb
  • Billable weight: 44 lb, set by dimensional weight

Reading the result

The example carton is billed at twice what it weighs. Light products in oversized boxes are the first place to look when parcel spend rises faster than volume.

Small changes move the result in both directions:

  • A smaller box. The same product in a 20 × 16 × 12 carton has a cubic size of 3,840 and a dimensional weight of 27.6, rounded up to 28 lb. That is 16 billable pounds less on every package.
  • A fraction of an inch. If the carton bulges to 24.2 inches long, it is measured as 25. The cubic size becomes 6,300 and the dimensional weight 45.3, rounded up to 46 lb: two pounds more for a fifth of an inch.
  • A different divisor. At UPS Retail Rates, the original carton is 6,048 ÷ 166 = 36.4, rounded up to 37 lb.

Common mistakes

  • Using the box’s nominal size. Measure the packed carton, not the size printed on the bundle of flat boxes.
  • Rounding to the nearest inch. Both carriers’ current rules round every fraction up.
  • The wrong divisor. Retail and daily rates differ, and negotiated agreements can change the number.
  • Forgetting other charges. Large or heavy packages can carry separate handling or size charges. Check the service guide for the service you use.

When the simple model stops working

  • Contract terms that change the divisor or rounding for some services.
  • Other carriers and international services, which publish their own divisors and rules.
  • Irregular shapes, such as tubes and bags, where measuring the extremes needs one consistent method across shifts.
  • Pallets and LTL freight, which are priced by freight class rather than dimensional weight. Use the freight density calculator.
  • Many SKUs and carton sizes, where picking the right box for each order needs item dimensions and order contents together.

Carriers publish their own rules and contracts can change them, so check the current service guide before quoting a customer. Fulfillment teams that ship mixed orders in many carton sizes usually need item dimensions in the item master and carton selection at pack-out; see omnichannel fulfillment. To follow those parcels after they leave the dock, see shipment tracking software.

Scope your project.

Tell us what you need to track, which systems you run and when it has to work. We reply with questions or a time to talk.